PROJECT DESCRIPTION: Hamilton Workingman’s Club Canopy

Hamilton Workingmen's Club was established in 1955, and in the last two decades has experienced significant growth with more than 7000 members, to become one of the Premier Clubs in New Zealand. Infrastructure development is important to both the club and community, and over the years the club has invested in maintaining and elevating their amenities. Fabric Structures was engaged to design, fabricate, and install a new partial enclosure over the green at the Hamilton Workingmen's Club. This project aimed to provide a versatile, weather-resistant space for club members and visitors, enhancing the usability of the green throughout the year.

APPLICATION and DESCRIPTION OF PROJECT:

The creation of unique Exhibition Pavilion using these large conical forms.  The conical forms to provide both shade and reprieve from the sun but also provide cooling through a passive cooling air ventilation system (reminiscent of the wind towers of traditional Middle Eastern architecture).

This project was entered in the LSAA 2018 Design Awards (Cat 4 Large Fabric Structures, #4432) by MakMax

Application: Cover over 3 adjacent bowling greens at the Playford City Bowls club, South Australia.

PROJECT DESCRIPTION: Playford Bowls Club Triple Green Roof Cover

The design, fabrication and installation of the largest tensile membrane canopy structure over a bowling green in the Southern Hemisphere. The 5300m2 PVC (Mehler FR900N) structure covers a total of 21 rinks (120m length), lit with state of the art LED sports lighting, allowing year round utilization of the bowling green’s irrespective of the weather conditions. In addition to bowls, the venue is also used to host corporate and social events.

Commendation LSAA 2018 Design Awards Large Structures (Cat 4, 4433)

Application: Large canopies with a fabric surface area over 2800m2 to cover multiple areas at the Inglis Selling Centre Warwick Farm Racecourse

Inglis Selling Centre Fabric Roofs at Warwick Farm - Project Description

The project was the design, fabrication and installation of multiple decorative and functional canopies for the Inglis Selling Centre at Warwick Farm Racecourse. With an overall Chukoh FGT800 PTFE fabric area of approximately 3060m2, the project covered multiple areas and structure types - “Trees” to cover the horse parade ring; a shelter canopy for the patron walkway for the pre-parade ring; a canopy for the wedding pavilion, and awnings for the hotel.

This project was entered in the LSAA 2018 Design Awards (Cat 4 Large Fabric Structures, #4431)

Application: 2 roof canopies for tennis courts – one to cover the synthetic show court and stadium seating; and one to cover another synthetic multipurpose court.

PROJECT DESCRIPTION:

The project involved design, fabrication and installation of 2 fabric roof structures at the Marrara Tennis Centre (now Darwin International Tennis Centre) – one weatherproof shelter to cover the Main Show Court and its associated seating; and another protective shade shelter over a multi-purpose court. The project had a total plan covered area of over 3,750m2 with Mehler FR1000N being used on the Main Court and Gale Commercial Heavy 430 on the Multipurpose Court.

The main show court is a long spanning roof, covering a 60m x 50m space. Given the cyclonic location, this presented additional design challenges throughout the project.

2024 LSAA Design Awards Entry Bank of Indonesia Millennial Function Hall

ID NUMBER  6725
ENTRY CATEGORY     6 - International Projects
ENTRANT ROLE          Designer / Installer
PROJECT NAME:        Bank of Indonesia Millennial Function Hall
APPLICATION:          Dome Canopy 

PROJECT DESCRIPTION: 

The Bank of Indonesia Millennial Function Hall ETFE dome, with a diameter of about 53 meters and spanning 2,700 square meters, is a remarkable architectural feat. Constructed from 325 ETFE cushions, the dome is celebrated for its striking appearance and excellent light transmission, allowing natural light to beautifully illuminate the space below. 

LSAA 2009 Design Award Entry: Arizona State University – Skysong Signature Structure

Entrant: Atkins Fabrication (Aust) Pty Ltd – Fabricator
Location: Arizona State University – USA
Client: USA Shade & Fabric Structures Inc.
Struct. Eng.: Wade Engineering
Fabricator: Atkins Fabrication (Australia) Pty Ltd

This project was entered in the LSAA 2009 Design Awards, Category 3.

Arizona State University – The Skysong Signature Structure is an excellent example of freeform tensile fabric architecture fabricated by Atkins.

No further details have been entered for this project

Entry in the LSAA 2007 Design Awards (Cat 4, 4007)  "Large Fabric Structures"

Entrant: Tensys

Location: Clarke Quay Redevelopment - Singapore   Client: Capital and Commercial Ltd
Architect: SMC Alsops & RSP Architects   Structural Engineer: Tensys
Specialist Consultant(s): Arup (Environmental)   Builder: Kajima Overseas Asia Pte Ltd
Fabricator(s): Skyspan (Asia) Pvt Ltd – Riverside/Bluebell 
canopies HIghtex GmbH – Street/Angel Canopies

Application and Function:

More than $50 million was spent upgrading the outdoor precinct to increase the shade and add to the comfort of visitors.

The Angel Structures are made from high performance thermoplastic film (ETFE).  It is the first time this material has been used on such a large scale in Asia.

Around the river’s edge, striking bluebell canopies over lilypads revitalize the area, helping to create a new trend in outdoor dining and entertainment.

APPLICATION OF PROJECT

Airport terminal drop off area roof

The New Yogyakarta International Airport (NYIA) Description

The new Yogyakarta International Airport (NYIA) at Kulon Progo Regency, serves the Yogyakarta Special Region, Indonesia, and is operated by Ankasa Pura. As part of the airport development, Fabritecture was contracted for the design & supply of ETFE pneumatic roofing as well as supply system and ducting.

The ETFE component of the roof comprises 84 2-layer cushions covers a plan area of approximately 14,314m² and is part of an overall canopy integrating polycarbonate elements also, overall providing 18,900m² of weather cover the exterior drop-off area.